ipvsadm -A -t 172.16.1.100:443 -s rr
ipvsadm -a -t 172.16.1.100:443 -r 172.16.1.5:443
ipvsadm -a -t 172.16.1.100:443 -r 172.16.1.6:443
ipvsadm -L -n 
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  172.16.1.100:80 rr
  -> 172.16.1.5:80                Route   1      1          1         
  -> 172.16.1.6:80                Route   1      1          1         
TCP  172.16.1.100:443 rr
  -> 172.16.1.5:443               Route   1      0          0         
  -> 172.16.1.6:443               Route   1      0          0

iptables -t nat -A PREROUTING -d 10.0.0.200 -p tcp --dport 443 -j DNAT --to 172.16.1.100:443

global_defs {
    router_id lb01
}
vrrp_instance VI_1 {
    state MASTER
    priority 200

    interface eth1
    virtual_router_id 50
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
 }
    virtual_ipaddress {
        172.16.1.100
    }
}

# 配置集群地址访问的IP+Port
virtual_server 172.16.1.100 80 {
    # 健康检查的时间，单位：秒
    delay_loop 6
    # 配置负载均衡的算法
    lb_algo rr
    # 设置LVS的模式 NAT|TUN|DR
    lb_kind DR
    # 设置会话持久化的时间
    #persistence_timeout 30

    # 设置协议
    protocol TCP

    # 负载均衡后端的真实服务节点RS-1
    real_server 172.16.1.5 80 {
        # 权重配比设置为1
        weight 1
        # 设置健康检查
        TCP_CHECK {
            # 检测后端80端口
            connect_port 80
            # 超时时间
            connect_timeout  3
            # 重试次数2次
            nb_get_retry 2
            # 间隔时间3s
            delay_beefore_retry 3
        }
    }
     # 负载均衡后端的真实服务节点RS-2
    real_server 172.16.1.6 80 {
        weight 1
        TCP_CHECK {
            connect_port 80
            connect_timeout  3
            nb_get_retry 2
            delay_beefore_retry 3
        }
    }
}
# 配置集群地址访问的IP+Port
virtual_server 172.16.1.100 443 {
    delay_loop 6
    lb_algo rr
    lb_kind DR
    protocol TCP

    real_server 172.16.1.5 443 {
        weight 1
        TCP_CHECK {
            connect_port 443
            connect_timeout  3
            nb_get_retry 2
            delay_beefore_retry 3
        }
    }
    real_server 172.16.1.6 443 {
        weight 1
        TCP_CHECK {
            connect_port 80
            connect_timeout  3
            nb_get_retry 2
            delay_beefore_retry 3
        }
    }
}

global_defs {
    router_id lb02
}
vrrp_instance VI_1 {
    state BACKUP
    priority 150

    interface eth1
    virtual_router_id 50
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
 }
    virtual_ipaddress {
        172.16.1.100
    }
}
# 配置集群地址访问的IP+Port
virtual_server 172.16.1.100 80 {
    # 健康检查的时间，单位：秒
    delay_loop 6
    # 配置负载均衡的算法
    lb_algo wlc
    # 设置LVS的模式 NAT|TUN|DR
    lb_kind DR
    # 设置协议
    protocol TCP

    # 负载均衡后端的真实服务节点RS-1
    real_server 172.16.1.5 80 {
        # 权重配比设置为1
        weight 1
        # 设置健康检查
        TCP_CHECK {
            # 检测后端80端口
            connect_port 80
            # 超时时间
            connect_timeout  3
            # 重试次数2次
            nb_get_retry 2
            # 间隔时间3s
            delay_beefore_retry 3
        }
    }
     # 负载均衡后端的真实服务节点RS-2
    real_server 172.16.1.6 80 {
        # 权重配比设置为1
        weight 1
        # 设置健康检查
        TCP_CHECK {
            # 检测后端80端口
            connect_port 80
            # 超时时间
            connect_timeout  3
            # 重试次数2次
            nb_get_retry 2
            # 间隔时间3s
            delay_beefore_retry 3
        }
    }
}
# 配置集群地址访问的IP+Port
virtual_server 172.16.1.100 443 {
    delay_loop 6
    lb_algo rr
    lb_kind DR
    protocol TCP

    real_server 172.16.1.5 443 {
        weight 1
        TCP_CHECK {
            connect_port 443
            connect_timeout  3
            nb_get_retry 2
            delay_beefore_retry 3
        }
    }
    real_server 172.16.1.6 443 {
        weight 1
        TCP_CHECK {
            connect_port 80
            connect_timeout  3
            nb_get_retry 2
            delay_beefore_retry 3
        }
    }
}